Service Areas

Furnace Installation in Willis, TX

Safe, efficient furnace installation for Willis homes near Lake Conroe.

Professional Furnace Installation in Willis, Texas

Willis sits just north of Conroe along I-45, where the north shore of Lake Conroe meets growing subdivisions and quiet acreage in the Piney Woods. When an aging furnace starts costing more to run and repair, replacing it with a properly sized, efficient system is one of the best upgrades you can make for the winter. Jack Gordon & Sons handles furnace installation in Willis from start to finish, on gas, propane, and electric systems. We focus on correct sizing, safe installation, and quality work. From lakeside homes off FM 1097 to communities like Emerald Lakes, we deliver reliable furnace installation built to last.

Signs It Is Time to Replace Your Furnace

A few clear signs point toward replacing your furnace rather than repairing it again. If your system is more than fifteen to twenty years old, needs frequent repairs, or has a cracked heat exchanger, replacement is usually the safer, smarter choice. Rising heating bills, uneven warmth, a yellow burner flame, and a furnace that struggles during a Willis cold snap all point the same direction. A cracked heat exchanger is especially serious, since it can release carbon monoxide. We will give you an honest assessment and help you decide whether a new, efficient furnace is the right move for your home.

Our Willis Furnace Installation Process

We make replacing a furnace straightforward. It starts with an in-home consultation, where a heating company technician evaluates your home, your ductwork, and your comfort needs, then calculates the right furnace size for your square footage and layout. We help you compare efficiency levels and equipment with clear, upfront pricing. On installation day, our team safely removes and disposes of your old furnace, installs the new system to manufacturer and code standards, checks for safe venting and combustion, and tests it thoroughly before we leave, so your Willis home is warm and protected the same day.

Right-Sizing for Willis Homes

Proper sizing is the foundation of any furnace installation. An oversized furnace short cycles, wastes fuel, and wears out faster, while an undersized one cannot keep your Willis home warm during a cold snap. We base every recommendation on a real heating load calculation, not a like-for-like swap, and we help you weigh AFUE efficiency against upfront cost. We bring the same care to furnace installation just up I-45 in Huntsville, so your new system fits how your home actually performs in the winter.

Quality Furnaces We Install

We install dependable, efficient gas, propane, and electric furnaces built for reliable winter heat. As a Ruud Pro Partner, we have deep expertise with Ruud equipment, and we help you choose the configuration that fits your home and budget, whether that is a reliable single-stage furnace, a two-stage model for more even comfort, or a high-efficiency condensing furnace. We also install matched systems and can pair a new furnace with an air conditioner or heat pump for year-round comfort. Every Willis installation uses quality equipment and safe, code-compliant workmanship throughout.

Financing & Affordable Installation

A new furnace is a significant investment, and we work to make it manageable. We offer financing options that let you spread the cost of a new heating system over time, so you can get the safety, comfort, and efficiency you need without putting it off. A properly sized, efficient furnace also runs more economically, helping control your heating costs. We provide clear, upfront pricing on every Willis furnace installation, so you know exactly what to expect before any work begins on your home.

Serving Willis & Nearby Areas

From Emerald Lakes and Republic Grand Ranch to the lakeside neighborhoods off FM 1097 and the homes near Berton A. Yates Stadium, we provide furnace installation across the greater Willis area. Our coverage reaches well beyond the city too. We handle furnace installation up the highway in New Waverly and throughout north Montgomery County. Wherever you are in the Willis and Lake Conroe area, a properly installed, safe, and efficient heating system is only a call away.

A Safer, More Reliable Furnace

Replacing an old furnace is as much about safety as comfort, especially with gas or propane heat. Aging systems with cracked heat exchangers or failing burners can release carbon monoxide, and a new furnace with a sound heat exchanger removes that risk. A new system also means fewer breakdowns on cold Willis nights and a manufacturer warranty behind your heat. To keep that warranty valid and your furnace running safely, we recommend annual maintenance. Ask our team about a maintenance plan when we install your system, and we will help you protect your investment and your family.

Why Willis Trusts Jack Gordon & Sons

Willis homeowners choose us for a new furnace because we get the details right and take safety seriously. We are a family-run business, fully licensed and insured, and a proud Ruud Pro Partner with the training to size and install gas and electric heating correctly and to code. We show up on time, give fair prices upfront, and stand behind our work. When you want furnace installation done right the first time, we are the name your neighbors recommend. Contact us for a free estimate.

What Willis Homeowners Say

Brandon Mraz

Emerald Lakes, Willis

They sized and installed a new furnace that heats evenly and safely now. Clean, professional work.

Kaitlyn Sorenson

Willis, TX

Honest advice on sizing and a clean install. Our new furnace is efficient and they checked venting.

Marcus Threadgood

Lake Conroe, Willis

Removed the old unit and installed the new one in a day. Professional and tidy near the water. Recommend.

Yesenia Cardona

Willis, TX

Financing made our furnace replacement easy. The new system is great and we feel much safer now.

Heath Donovan

Republic Grand Ranch, Willis

They sized our new furnace right and explained every option. Highly recommend this team.

Crystal Vela

Willis, TX

From estimate to install, smooth and honest. Our home is warm and safe through the winter now.

Common Questions

How long does a furnace installation take?
Most standard furnace installations are completed in a single day. After we safely remove your old unit, we set the new furnace, make the gas, propane, or electrical connections, connect the venting and ductwork, install or adjust the thermostat, and test the system, including checking for safe combustion and venting, before we leave. Jobs that involve ductwork changes or a high-efficiency condensing furnace with different venting can take longer, and we will explain the timeline up front. Our goal is to get your Willis home safely heated with its new system the same day.
Proper sizing comes from a heating load calculation, not just square footage or the size of your old furnace. We evaluate your home’s size, layout, insulation, windows, and how heat escapes before recommending a system. An oversized furnace short cycles, wastes fuel, and wears out faster, while an undersized one cannot keep up during a Willis cold snap. Getting the size right, measured in BTUs, means even, comfortable heat and efficient operation. We handle that calculation as part of every installation so your new furnace is properly matched to your home.
AFUE measures how efficiently a furnace turns fuel into heat, so a 90 percent or higher condensing furnace uses noticeably less fuel than an older 70 or 80 percent model. Higher efficiency lowers fuel use but costs more upfront and needs different venting. In the Willis area, with a relatively short heating season, we help you weigh that upfront cost against the savings over the system’s life. For some homes a high-efficiency furnace is worth it, and for others a solid mid-efficiency model is the better value. We will explain the real differences so you can choose.
The heat exchanger separates combustion gases from the air circulating through your home. When it cracks, it can allow carbon monoxide, an odorless and dangerous gas, to leak into your living space. For safety, a cracked heat exchanger usually means the furnace should be replaced rather than repaired, especially on an older system where the repair approaches the cost of a new unit. Installing a new furnace removes that risk entirely and gives you a sound, warrantied system. We will always tell you honestly if we find this issue in your Willis home, and we recommend working carbon monoxide detectors.
Yes. Removal and proper disposal of your old furnace is included in our installation service. Our team safely disconnects the gas, propane, or electrical supply, removes the old unit, and hauls it away, leaving the work area clean. You do not have to arrange anything separately or deal with the old furnace yourself. We handle the entire changeover, from removing the worn-out system to installing, testing, and safety-checking your new one, so the process is simple and your Willis home is heating with its new furnace by the end of the job.
Yes. We know a new furnace is a major purchase, so we offer financing options that let you spread the cost over time rather than paying it all at once. That makes it easier to choose a properly sized, safe, efficient system instead of putting off a replacement you need, which matters especially when safety is a factor. A new efficient furnace also runs more economically than an old one. Ask us about financing when we provide your estimate, and we will explain the options so you can choose what fits your Willis household budget.

Ready for a New Furnace in Willis?

Upgrade to safe, efficient warmth. Call Jack Gordon & Sons at (281) 292-3398 for a free furnace installation estimate.

Free Estimates & Second Opinions on Equipment Replacement

Request Your Free Estimate

Tell us about your home and current furnace, and we will get you a free Willis installation estimate.

We do not offer duct cleaning.

Request a Free Replacement Estimate