Service Areas

Furnace Installation in Conroe, TX

Safe, efficient furnace installation and replacement for Conroe homes.

Professional Furnace Installation in Conroe, Texas

When an aging furnace starts costing more to run and repair, replacing it with a properly sized, efficient system is one of the smartest upgrades a Conroe homeowner can make, and it brings real peace of mind on cold nights. Jack Gordon & Sons handles furnace installation in Conroe from start to finish, helping families from historic downtown to newer communities like Grand Central Park choose the right heating system. We focus on correct sizing, safe installation, and quality work, whether your home runs on gas or electric heat. From properties near the W.G. Jones State Forest to neighborhoods along Loop 336, we deliver reliable furnace installation built to last.

Signs It Is Time to Replace Your Furnace

A few clear signs point toward replacing your furnace rather than repairing it again. If your system is more than fifteen to twenty years old, needs frequent repairs, or has a cracked heat exchanger, replacement is usually the safer, smarter choice. Rising heating bills, uneven warmth between rooms, a yellow burner flame, and a furnace that struggles to keep your Conroe home comfortable all point the same direction. A cracked heat exchanger is especially serious, since it can release carbon monoxide. We will give you an honest assessment and help you decide whether a new, efficient furnace is the right move.

From Estimate to Startup

Every Conroe installation begins with a sit-down, not a sales pitch. We measure your home, look at the ductwork and the space the equipment sits in, and run the heat-load numbers before we ever quote a system. You see the sizing, the efficiency choices, and the price in writing. On the day of the work, the old unit comes out, the new furnace goes in to code, and we do not leave until it has cycled, vented safely, and heated the house. That is the standard you get from a local heating and cooling you can trust.

Right-Sizing & Efficiency for Conroe Homes

Proper sizing is the foundation of a good furnace installation. An oversized furnace short cycles, wastes fuel, and wears out faster, while an undersized one cannot keep your Conroe home warm during a cold snap. We base every recommendation on a real heating load calculation, not a like-for-like swap. We also help you weigh efficiency, measured as AFUE, so you can balance upfront cost against long-term savings. We bring the same care to furnace installation just down I-45 in The Woodlands, so your new system fits how your home actually performs.

Matching the Furnace to Your Home

Not every Conroe home wants the same furnace, so we fit the equipment to how you live. A straightforward single-stage gas furnace suits many homes here; a two-stage model smooths out the temperature swings in a larger or two-story house; and a high-efficiency condensing unit pays its way where the heat runs often. As a Ruud Pro Partner we know that lineup cold, and we can tie a new furnace to your existing air conditioner so the whole system works as one.

Spreading Out the Cost

A furnace is not a small purchase, and we would rather help you plan for it than watch you put it off. Our financing options break the cost into monthly payments that fit a Conroe household budget, and a right-sized, efficient unit keeps the running cost down once it is in. You get the full price up front, with no line items that surprise you later.

Serving Conroe & Nearby Areas

From April Sound and Graystone Hills to Crighton Ridge and the neighborhoods around the Conroe Regional Medical Center, we provide furnace installation across the entire city. Our service area reaches well beyond the city limits too. We handle furnace installation in nearby Spring to the south and up north in Willis along the lake. Wherever you are in the Conroe area, a properly installed, efficient heating system is one call away.

Why the Upgrade Is Worth It

Beyond the comfort, a new furnace quietly removes a risk. An old, cracked heat exchanger can leak carbon monoxide; a new one with a sound exchanger and proper venting does not. You also trade frequent repair calls for a warranty and years of reliable heat. Keep up with a yearly check-up and that warranty stays valid, which is why we offer a maintenance plan with every Conroe install.

Why Conroe Trusts Jack Gordon & Sons

Conroe homeowners choose us for a new furnace because we get the details right and take safety seriously. We are a family-run team, fully licensed and insured, and a proud Ruud Pro Partner with the training to size and install gas and electric heating correctly and to code. We show up on time, give fair and upfront pricing, and stand behind our work. When you want furnace installation done right the first time, we are the name your neighbors recommend. Contact us for a free estimate.

What Conroe Homeowners Say

Russell Hatcher

Grand Central Park, Conroe

They replaced our old furnace and the new one heats evenly and quietly. Felt much safer too.

Camille Dubose

Conroe, TX

Honest advice on sizing and no pressure. Our new furnace is efficient and the install was clean.

Andre Pacheco

April Sound, Conroe

Professional and on time. Removed the old unit and installed the new furnace in a day. Great work.

Bethany Sorrell

Conroe, TX

Financing made our furnace replacement easy. They checked the venting for safety before leaving.

Curtis Yager

Crighton Ridge, Conroe

They sized our new furnace correctly and explained every option. Highly recommend this team.

Wanda Ellison

Conroe, TX

From estimate to install, smooth and honest. Our home is warm and we have real peace of mind now.

Common Questions

How long does a furnace installation take?
Most standard furnace installations are completed in a single day. After we safely remove your old unit, we set the new furnace, make the gas or electrical connections, connect the venting and ductwork, install or adjust the thermostat, and test the system thoroughly, including checking for safe combustion and venting, before we leave. Jobs that also involve ductwork changes or upgrading to a high-efficiency condensing furnace with different venting can take longer, and we will explain the timeline up front. Our goal is to get your Conroe home safely heated with its new system the same day.
Proper sizing comes from a heating load calculation, not just square footage or the size of your old furnace. We evaluate your home’s size, layout, insulation, windows, and how heat moves through it before recommending a system. An oversized furnace short cycles, wastes fuel, and wears out faster, while an undersized one cannot keep up during a Conroe cold snap. Getting the size right, measured in BTUs, means even, comfortable heat and efficient operation. We handle that calculation as part of every installation so your new furnace is properly matched to your home.
AFUE measures how efficiently a furnace turns fuel into heat, so a 90 percent AFUE furnace converts far more of its fuel to warmth than an older 70 or 80 percent model. Higher efficiency means lower fuel use, though the best value depends on your budget and how much you run the heat. In the Conroe area, where the heating season is relatively short, we help you weigh the upfront cost of a high-efficiency condensing furnace against the savings over its life. We will explain the real differences so you can choose the system that makes the most sense for your home.
The heat exchanger is the component that separates the combustion gases from the air circulating through your home. When it cracks, it can allow carbon monoxide, an odorless and dangerous gas, to leak into your living space. For safety, a cracked heat exchanger usually means the furnace should be replaced rather than repaired, especially on an older system where the repair cost approaches the value of a new unit. Installing a new furnace removes that risk entirely and gives you a sound, warrantied system. We will always tell you honestly if we find this issue in your Conroe home.
Yes. Removal and proper disposal of your old furnace is included in our installation service. Our team safely disconnects the gas or electrical supply, removes the old unit, and hauls it away, leaving the work area clean. You do not have to arrange anything separately or deal with the old furnace yourself. We handle the entire changeover, from removing the worn-out system to installing, testing, and safety-checking your new one, so the process is simple and your Conroe home is heating with its new furnace by the end of the job.
Yes. We know a new furnace is a major purchase, so we offer financing options that let you spread the cost over time rather than paying it all at once. That makes it easier to choose a properly sized, safe, efficient system instead of putting off a replacement you need, especially when safety is a factor. A new efficient furnace also runs more economically than an old one. Ask us about financing when we provide your estimate, and we will explain the options so you can choose what fits your Conroe household budget.

Ready for a New Furnace in Conroe?

Ready to stop patching an old unit and start fresh? Reach Jack Gordon & Sons at (281) 292-3398.

Free Estimates & Second Opinions on Equipment Replacement

Request Your Free Estimate

Tell us about your home and current furnace, and we will get you a free Conroe installation estimate.

We do not offer duct cleaning.

Request a Free Replacement Estimate